Staub Electronics EP-400-NMC EPISODE - RACK MOUNT UPS NETWORK MANAGMENT CARD - Manual (Page 16)

Remote Management System
16
[System->Shutdown]
Items Definition
Clients Shutdown Delay
The Longest shutdown delay time required for
connected PowerPanel Business Edition Client.
Force Negotiation
Select to renegotiate the Clients Shutdown Delay with
connected PowerPanel Business Edition Client .The
Clients Shutdown Delay will return to a default of 2
minutes, and the negotiation time is up to 10 minutes
to finish.
[System->TCP/IP] Display the current TCP/IP settings: IP address, subnet mask, gateway, DNS
server. Also provides the function to obtain TCP/IP settings from the DHCP server.
- DHCP server: Select the “Obtain IP Address” option and click Apply to get IP
address, subnet mask, gateway by DHCP. Select the “Obtain DNS Address” option
and click Apply to get the IP of DNS from the DHCP.
- Manual : Enter the TCP/IP settings directly and click Apply.
[System->HTTP service] Select the TCP/IP port of the Hypertext Transfer Protocol (HTTP)
(80 by default).
[System->SNMP service] Allows you to select the NMS, defined by the IP settings that can use
the channel to control the system data access through SNMP.
Items Definition
SNMP service
Allow Access
Set the SNMP service to either Enable or Disable
SNMP Access Control
Community name
The name used to access this community by a
Network Management System(NMS)
The field must be 1 to 15 characters length.
SNMP Access Control
IP
The IP address or IP address mask can accessed by
NMS.
A specific IP address allows access only by the NMS
with the specified IP Address. The 255 is regarded as
the mask and the rules are as follows:
‧192.168.20.255: Access only by an NMS on the
192.168.20 segment.
‧192.255.255.255: Access only by an NMS on the
192. segment.
‧0.0.0.0 (the default setting) or 255.255.255.255 :
Access by any NMS on any segment.
Access type
The allowable action for the NMS through the
community and IP.
Read only Gets at anytime but cannot SETS.
Write/Read
Gets at anytime, SETs anytime unless someone is
logged in the Web interface.
Forbidden No GETS or SETS.