Steelcraft Automotive 52250 GRILL GUARD User Manual
Page 4
Page 4 of 5
12/30/08 Rev2(DP)
Driver Side Installation Pictured
Fig 4
Installation pictured
without the splash
guard for illustration
Fig 7
Fig 5
(Fig 3A)
Driver side mounting locations viewed from
behind the bumper (tow hook equipped models)
Front
Installation pictured
without the splash
guard for illustration
Fig 6
Start with hex bolts in this
location on the driver and
passenger side to use as a
hinge.
12mm x 35mm Hex Bolts
12mm Flat Washers
12mm Lock Washer
12mm Hex Nuts
Once secured to both
brackets, with assistance,
rotate the Grille Guard up
into position. Install the
remaining Hex Bolts and
fasten the Grille Guard to
the Upper Support Bracket
Fig 3B
Pictured with
Support Bracket
installed
(1) 8mm x 20mm Button
Head Allen Bolt
(2) 8mm Flat Washers
(1) 8mm Nylock Nut
Rotate the Grille Guard up into position