Steelcraft Automotive 52200 GRILL GUARD - Manual (Page 4)

GRILLE GUARD
07-12 JEEP J/K WRANGLER
Page 4 of 4 3/27/12 Rev2(DP)
Complete Installation
Driver Side Installation Pictured
(1) 10mm x 30mm Button
Head Allen Bolt
(2) 10mm Flat Washers
(1) 10mm Nylon Lock Nut
Fig 7
(3) 12mm x 30mm Hex Bolts
(6) 12mm Flat Washers
(3) 12mm Nylon Lock Nuts
(Fig 9) Pictured without fill plate for example only
Once the Mounting Brackets have
been installed and checked for
alignment, hold the splash guard up
into position and mark the cut area
on the inside of the guard. Start with
a small opening and slowly enlarge
the opening to get the best fit around
the brackets. Area cut from guard
pictured for example only.
(Interior view)
(Fig 8) Pictured without splash guard for example only
Front
Front
Front