Teka LP7 830 - Manual (Page 33)

32
A: Wiring box
B: Door switch
C: Water level switch
D: Drain pump motor
E: Dispenser
F: 2-way valve
G: Softener valve
H: Overflow switch
I1: Inlet valve
I2: Inlet valve (Aquastop)
O: Low rinse aid switch
P: Temperature sensor
Q: Flowmeter
R: Turbidity sensor
J: Washing pump motor
K: Temperature limiter
L: Heater
M: Relay
N: Low salt switch
The symbol on the product or on its packaging indicates that this product may not
be treated as household waste. Instead it shall be handed over to the applicable collec-
tion point for the recycling of electrical and electronic equipment. By ensuring this prod-
uct is disposed of correctly, you will help prevent potential negative consequences for
the environment and human health, which could otherwise be caused by inappropriate
waste handling of this product.
For more detailed information about recycling of this product, please contact your local
city office, your household waste disposal service or the shop where you purchased the
product.
en