Evaluating the returned packet, Evaluating the returned – Teledyne LeCroy IBTrainer - IBTrainer Users Manual User Manual
Page 17
Performing a First Test
Getting Started with the IBTrainer
CATC IBTrainer InfiniBand Exerciser, August 2002
17
Evaluating the Returned Packet
After you have sent the SMP packet, an entry appears in blue in the
Packet Log
window. The IBTrainer then listens for a response from the
DUT.
When the DUT answers, a new entry corresponding to the returned
packet appears in red in the Packet Log window, as shown in the figure
below.
Double-click the returned packet’s entry. The SMP packet: MAD VL=15
getResp NodeInfo
dialog box opens. The NodeInfo properties are then
displayed in the SMP Data list in this dialog box, as shown in the
following figure.
You can compare the received NodeInfo properties with the DUT’s
values to ensure that the packet was correctly transmitted.