Teledyne LeCroy USB Chief - Users Manual User Manual
Page 122
Advertising
114
Merlin Protocol Analyzer User’s Manual
CATC
Version 1.7
Step 2
Use the Breakout Board Setup window to set parameters for Input
signals, Current Measure, Output signals, and Trigger types.
Inputs:
•
Select Record with Trace to save the selected input signals in a Trace file.
•
Select the Inputs you want to turn on.
•
Select Active High or Active Low for Trigger type.
Current Measure:
•
Select On to enable a current meter to take measurements on the Breakout
Board during recording.
Outputs:
•
Each output can be turned on or off or set to signal continuously, suppressing
the Trigger.
Advertising