Teledyne LeCroy USB Chief - Users Manual - Manual (Page 59)

51
Chief User’s Manual CATC Version 1.7
A marked packet is indicated by a vertical red bar along the left edge of the packet
# block:
Edit or Clear Marker
To clear or edit the comments associated with a packet marker,
Step 1 Left-click on Packet # for the chosen packet.
Step 2 To edit the Marker Comment, select Edit Marker Comment.
The Edit marker comment window appears.
Step 3 Edit the comment as desired.
Step 4 Click OK.
OR
Step 5 To clear a Marker, click Clear Marker.
The vertical red Marker bar disappears.
View Raw Bits
You can expand a specific packet to view the raw bits in detail.
To view the raw bits,
Step 1 Left-click on Packet # for the packet you wish to view.
You see the Packet menu:
Step 2 Select View Raw Bits.