Teledyne LeCroy UWBTracer User Manual - Manual (Page 33)

UWBTracer/Trainer User Manual Chapter 2: Hardware Description
LeCroy Corporation
15
UWB Analyzer Plug-in Module
LEDs (status of the MPI or RF channel)
Connectors
The connectors are:
• MPI ADAPTER: Connector to MPI Adapter
• ANT: SMA Connector for Antenna
LED State MPI Channel RF Channel
No light Idle Does not detect PCLK or
PHY_ACTIVE Does not detect wireless
frames
Yellow Blink Fast Synching Trying to synchronize to
MPI traffic and waiting for
PCLK and PHY_ACTIVE Trying to synchronize to
RF traffic and waiting for
wireless traffic
Yellow
Synched
Synchronized:
Capturing MPI traffic with
PHY_ACTIVE signal high
Synchronized:
Capturing wireless frames
Red Blink Slow Recording
Pre-Trigger
Recording
Pre-Trigger traffic
Recording
Pre-Trigger traffic
Red Recording
Post-Trigger
Recording
Post-Trigger MPI traffic
Recording
Post-Trigger wireless
traffic