TSI IAQ50 - Manual (Page 15)

15
sen, the instrument will sample continu-
ously until it is either stopped manually,
runs out of memory, or the batteries run
out. If a number between 1 and 9999 is
chosen, the instrument will take that
number of samples and then stop stor-
ing readings.
The instrument will then return to a
normal measuring mode.
Press ENTER to start the automatic time
log. LOG will flash on the display while
this function is running. You need to
press ENTER to stop the logging func-
tion if it was set for “COnt”. You may
also press ENTER at any time during the
logging function to cancel a preset num-
ber of samples.
The log mode remains programmed
until you go into TIME LOG and turn
this feature “OFF.” Simply press ENTER
to start another time log test.