TSI IAQ50 - Manual (Page 22)

22
to change the value. Press ENTER to
return to normal measuring mode.
RECALL Key
The RECALL key lets you review data
from a particular test ID.
Press the RECALL key. The most current
test ID number will show on the display.
Press ENTER to review measurements
in this test ID, or use the
5 or 6 keys to
choose another test ID to review. If
dashes appear in the top line of the
display, there is no stored data in that
particular test ID.
Use up arrow to view average, total
number of samples (count), minimum
reading, maximum reading, and indi-
vidual readings for the selected test ID.
The samples will be displayed in the
order that they were taken.
To view a different test ID, you need to
press RECALL again.
The display will always show CO
2
meas-
urements. To review other measure-