Apex Digital GB5108 - Manual (Page 17)

15
Projection - GB4308, GB5108
Connecting a VCD Player with Component Video Connectors
Connecting a VCD Player with A/V Connectors
Your DVD player has component (Y,B-Y, and R-Y)jacks.
Disconnect all power before making any connections.
1 Using three separate component video cables, connect the DVD player’s Y, B-Y and R-Y jacks to
the YP
B
P
R
1 or YP
B
P
R
2 jacks on the projection TV.
2 Using an audio cable, connect the DVD player ’s Audio OUT jacks to the projection TV’s
YP
B
P
R
1 or YP
B
P
R
2 AUDIO IN jacks.
3 Switch to YPbPr1 or YPbPr2 mode, press the VIDEO button.
You DVD player does not have component (Y,P
B
,and P
R
) jacks.
Disconnect all power before making any connections.
If you video equipment has an S-VIDEO OUT terminal, connect it to the SVHS IN terminal of the
projection TV. If not, connect it to the VIDEO IN terminal.
INSTALLATION (continued)