Connecting a digital tv receiver, Installation (continued) – Apex Digital GB5108 User Manual
Page 18
Advertising
16
Instruction Manual
Connecting a Digital TV Receiver
Disconnect all power before making any connections.
1
Using three separate component video cables, connect the digital TV set-top box’s Y, P
B
and P
R
jacks to the YP
B
P
R
1 or YP
B
P
R
2 jacks on the projection TV.
2
Using an audio cable,connect the Digital TV Set-top box’s Audio OUT jacks to the projection TV’s
YP
B
P
R
1 or YP
B
P
R
2 AUDIO IN jacks.
3
Press VIDEO to switch to YPbPr1 or YPbPr2 mode.
This projection TV is not compatible with digital TV receivers configured with RGB or VGA
output connectors.
If you digital TV set-top box has both VIDEO OUT and S-VIDEO terminals, you can also
connect them to the corresponding IN terminal of the projection TV.
*
*
INSTALLATION (continued)
Advertising