Apex Digital GB5108 - Manual (Page 28)

26
Instruction Manual
CTA: Color Temperature Adjust Normal/Cold/Warm
You can select Cold, Normal or Warm that best suits the program you are watching.
Cold: Select to give the white colors a blue tint.
Normal:Select to give the white colors a neutral tint.
Warm: Select to give the white colors a red tint (NTSC-Standard).
FILM:Film mode ON/OFF
Recommended for 24 frame-per-second films.
Press MENU to enter Audio menu.
Press CH+/- to highlight the item to be adjusted.
Press VOL+/- to adjust parameters.
Item
Adjustment Effect
ON/OFF
ON/OFF
Auto volume control ON/OFF
Press VOL+/- to turn on the next menu.
Press CH+/- to call up the item to be adjusted, and press VOL+/- to adjust.
* You can not select Audio Out when in YPbPr1 or YPbPr2.
Stereo:Select for stereo reception when viewing a program broadcast in stereo.
SAP: select to automatically switch the projection TV to second audio programs
when a signal is received.
(If no SAP signal is present, the projection TV remains in Stereo mode.)
Mono:Select mono reception
* You can not make selection when receiving Mono signal.
* MTS can not be selected in AV mode and has only Stereo mode.
VOL-
Decrease
Decrease
Increase left speaker
VOL+
Increase
Increase
Increase right speaker
Treble
Bass
Balance
Surround
DBE
AVC
Audio Out
MTS
Using the Audio Menu
Treble 60
60
+15
ON
ON
ON
Stereo
Bass
Balance
Surround
DBE
AVC
Audio Out
MTS
MENUS (continued)