TREND 963 Web User Guide - Manual (Page 37)

Using 963 From a Client
963 Web User Guide TC200685 Issue 4 37
4.6.2.3 Adjust a Timezone
The occupation times of the controllers on the IQ system (i.e. when they are in occupancy, current week) are set by
the times defined in the diary group they belong to. It is possible to override those times. Adjusting the time in this
way overrides the times specified by the 963’s diary by directly modifying the times stored in the controller.
To adjust a time zone:
1. Display the page containing the button or picture that enables the time zone to be adjusted, as a described in
the ‘Display a Schematic Page’ section of this manual, and click the button or picture.
Or
View the time zone that is to be adjusted in the Device Viewer, as described in the ‘Display the IQ System’
section of this manual, right click the time zone that is to be adjusted, and click Adjust Point.
2. If adjusting a time zone in a pre IQ3 controller a dialogue box is displayed asking if you what times are to
be adjusted. Click Today and next 6 days to adjust the current week times, click Default week times to
adjust the default times (standard week).
The screen changes.
3. Scroll down to the day for which the occupation times are to be changed.
4. In the boxes in the Start and End columns enter start or stop times for each period.
 For IQ3 controllers periods can be added by selecting the check box in the New column, then in the
boxes in the Start and End columns entering start or stop times for the new period, and then clicking
Send adjustments. Unwanted periods can be removed by selecting the check box next to the and
then clicking Send adjustments.
 For pre IQ3 controllers unused periods should have both times set to 24:00.
5. Click Send adjustments in the area that specifies the times.
6. Repeat steps (4) and (5) for each day.
4.7 Playback Recorded Data
If data logged in a controller has been recorded by 963 it can be displayed as a graph.
To playback recorded data:
1. Display either a compact graph, or a precision graph for the value that is to be for which data is to be
played back as described in the appropriate section of this manual.
2. On the Data menu click Load Recorded Data. The Choose a date range dialogue box is displayed.
3. Click the required option to specify the date range for the data that is to be played back. To specify a
specific date range click Custom and specify the first and last date in the range by clicking next to
the Start and End boxes to display a dialogue box for entering the required data,
4. Click OK. The graph will be displayed.
You can zoom in and out of the graph to make it easier to see the data. The graph’s data can be displayed as a list of
points.
Note that this feature is only available accessing the 963 Server in graphic mode.