Vestil PPI-90 - Manual (Page 6)

6
4. Keep the well sight and enough range to other people or
mechanism. When handing long high and wide load, avoiding to
affect your sight, you must forego the truck, move carefully.
5. Reduce the speed when other people or truck is nearing. If you
want to forerun the other truck or bring to somebody’s attention,
you can use the electric bell.
6. Pay attention to control your truck, use urgent brake and
repeated start and speedy turn as few as possible in order to
lessen the damage of vehicle and accidental injuries of persons.
7. Before you start the truck, ensure your freight stable. Place the
forks to the lowest, 150~400mm is the best distance to the
ground.
8. Do not overload the truck, otherwise, it will add to the truck’s
wastage and easy to cause accident.
9. Moving on slopes, you must observe the instruction stated below:
Do not hand the unstable or loosely stacked loads. Keep the
forks lowest and travel slowly and with caution. The same as
unload travels. You must not always turn your truck on the
slopes.
10. If there are some faults in your truck, you must repair it in time
by the specialist or expert. Don’t operate the damaged or faulty
truck. Our company provides the specialized maintenance.
7) Battery’s and Charger’s usage and conservation
1. Battery must be placed stable on rack avoiding to short circuit.
Ensure that the polarities of the battery are connected correctly
and with good contact. Apply some geoline to pretend the
interface from corrosion.
2. Charging should be operated in ventilation and non-flammable
surrounding. Keep battery and charger away from spark, high
temperature and moistness. You must provide enough
operating space for charging, otherwise, it would be result in
overheat.
3. The charging voltage must be limited within 13.8 ~ 14.2.
Vestil Manufacturing Corp. www.vestil.com 800-348-0868