Vestil S-CB-118 - Manual (Page 16)

16
Operation
Lifting load
CAUTION!
Before lifting a load to be transported, ensure that the
load does not exceed the carrying capacity of the
truck.
The nominal carrying capacity and lifting heights can
be viewed in the load diagram.
Ensure that the load can be taken up in a compact and
stable manner. Slipping or falling of the load must be
avoided.
The load must not project into the lifting frame.
The load must be centered and evenly distributed on
the forks.
The load must not project more than 50mm over the
end of the lifting forks.
Transporting the load
CAUTION!
Raise the load only slightly to transport
For safety reasons (view) transport only in a forward
direction
Only when lifting up or lowering down the load it is
permissible to drive forwards or in reverse with a
raised load
Lift up or lower down loads on level surfaces
When unloaded, move stacker only with forks lowered