Vestil S-CB-118 - Manual (Page 43)

43
VESTIL MFG. CO.
Model: S-62-AA/FF/FA
Another picture of the nub, spring not shown. At this point, verify the solder joints are in tact
and the two wires are attached to the switch as shown below. Also verify the belly switch is not
stuck in. You should be able to push on the switch and the actuator will move freely in and out,
you should here a click as you do this. If the switch is stuck in contact Vestil Manufacturing for
replacement options. Fig18
Replace any broken/missing components. To assemble, press the red belly switch cover back on
the tiller head seating the red holes over the gray nubs. Basically the opposite of the procedure in
Fig. 17, but without a screwdriver. Fig 19
Filename: Belly Switch trouble shoot
VESTIL MFG. CO.
Belly Switch
actuator
Solder
connection
Solder
connection