Arturia 2.5 - Manual (Page 31)

ARTURIA – Analog Factory EXPERIENCE 2.5 – USER’S MANUAL 31
Wheels
PITCH WHEEL Wheel controlling the pitch of the sound. When pushed in the up
direction, the sound “bends” and becomes higher in tune. When pushed
in the Down direction, the sound “bends” and becomes lower in tune.
MOD Wheel controlling modulation (MIDI controller #1)
The modulation wheel is not necessarily connected on every preset! It will depend on
the preset being used.
4.4.3 Filter
Filter
CUTOFF Modifies the cut-off frequency (this filter has the ability to make the
sound more or less bright by controlling the amount of high frequencies)
RESO modifies the resonance of the filter (the sound becomes more “cutting”
when the parameter is pushed)
4.4.4 LFO
The LFO, Low Frequency Oscillator, is used as a modulation source for Analog Factory 2.5’s
sound. It allows the user to create variations in a sound parameter to generate diverse
effects such as a vibrato, “wahwah” effect, etc. The two parameters that may be modulated
within the LFO are:
LFO