Arturia 2.5 - Manual (Page 47)

ARTURIA – Analog Factory EXPERIENCE 2.5 – USER’S MANUAL 47
The DC adapter is not included on the Analog Experience pack. Before connecting an external DC adapter, make
sure you are connecting a compatible adapter. See the technical specifications for compatibility details!
It is not necessary to install the driver for the Analog Factory Keyboard in order to get it to
function with your computer. Analog Experience “The Factory” is “plug and play”
compatible. The driver is automatically installed when you install Analog Experience “The
Factory”.
6.5.1 MIDI connections
The Analog Factory Keyboard sends and receives MIDI via USB. Furthermore the Analog
Factory Keyboard can function as a MIDI interface. A ‘MIDI out’ connector is located on the
back of the keyboard. This connector lets you send MIDI data to anything that has a MIDI in
connector. This could be a sound module, synthesizer, sequencer or drum computer for
instance.
6.5.2 Power supply
Although the Analog Factory Keyboard is USB bus powered, it is also possible to use a DC
adapter when this is required. If you wish to use an adapter instead of the bus power, it is
possible to connect an optional 12V DC 500mA
adapter to the back of the Analog
Experience “The Factory” Keyboard.
6.6 Basic MIDI control
Every parameter of Analog Factory 2.5 is controllable by the included keyboard controller.
Once the software is started and the keyboard controller is connected, the software can be
totally controlled without the use of mouse or a computer keyboard.