Arturia 2.5 - Manual (Page 53)

ARTURIA – Analog Factory EXPERIENCE 2.5 – USER’S MANUAL 53
8.2 Changing MIDI settings
8.2.1 Global settings
The settings that can be set globally (i.e. for the entire keyboard) are:
MIDI CHANNEL MIDI channel that the keyboard will use to send all MIDI events.
KNOB MODE Absolute: default mode for Analog Factory. Knobs send absolute
values.
Relative: knobs send 63 and below for negative values, 65 and
above for positive values.
The relative mode is not compatible with Analog Factory, this setting is only
available for an increased compatibility with other MIDI devices or softwares.
DEFAULT VALUES Pressing this button will reload all factory default settings for the
keyboard.
8.2.2 Individual control settings
To configure the MIDI CC used for a specific control on your keyboard:
Click on the control you wish to select. The selected control will be highlighted in Red.
Its settings will be automatically displayed in the “Selected Control” section.
Change the CC number assigned to this control by selecting the appropriate line in the
drop-down list: