WansView NCH 537MW - Manual (Page 10)

http://www.wansview.com
10
Figure 7
1) Please go to the setting interface of Router, and choose “Port Forwarding”；
2) Choose “Add custom Service” ;
3) Input IP camera http port;
4) Input LAN IP Address of the camera, click “Apply” (port number and IP address as you set in
figure 2）
After finishing the port forwarding, you can use WAN IP address of router and http port of camera to
visit the camera by remote computer as figure 6.
Notice: because the routers are different, so the interface and setting method of router are also
different, how to do the port forwarding for various routers, please refer to the user manual of your
router or consult with router manufacturer.