WansView NCH 537MW - Manual (Page 7)

http://www.wansview.com
7
Figure 1
Insert CD to computer driver, double click “HSearch_en.exe” in the CD, will pop up the interface
as figure 2, please operate as the following steps:
Figure 2
1) Click „Search‟（Please make sure your firewall will not block up the item to be searched）
2) Choose a camera;
3) Change the ip address of the ip camera according to the information in the red frame on the
left. The numbers in the red circle should not be the same. Http port should be a number
between 80~65535;
4) Enter user name and password for the device, the default is “admin” and “123456” ;
5) Click „update‟;
6) After successfully update, click “Search (F3)”, choose the device again and click “Browse