Dvance setting, User management, Auto capture setting – WansView NCH 537MW User Manual
Page 17: Advance setting
Advertising
http://www.wansview.com
17
3.5. Advance setting
3.5.1. User management
Figure 20
There are 3 levels of user authorization in it.
Administrator:
“admin” has the highest authority. It can do any settings.
Factory default password:
123456.
User: user can only operate the device but can‟t do any setting changes.
The default password is
user.
Guest: User can view the video, but can‟t operate the device.
The default password is guest.
Note: Please change these 3 level passwords when your first use to ensure your safety.
3.5.2. Auto Capture Setting
Figure 21
Tick “Save Picture on the SD card”, the snap pictures will be stored into SD card during the setting
time.
Advertising
This manual is related to the following products: