Warner Electric ARC 2000 - Manual (Page 10)

10 Warner Electric • 800-825-9050 P-2016 • ARC
Apply a small amount of blue loctite (242
threadlocker) on the inner thread of the nut; screw
into place. See Figure 44.
Figure 44
Apply Blue
Loctite
Using FIX-0003 and FIX-0005 to hold the clutch in
place, torque to 45 ft-lbs. (508Ncm). See Figure 45.
Figure 45
FIX-0005
FIX-0003
Install .472” (12mm) long set screw. See Figure 46.
Figure 46
Install two ¼” (M6) set screws. See Figure 47.
Figure 47
Apply grease to top of seal. See Figure 48.
Figure 48
Torque test the unit before re-installing upper
assembly and installing headset on machine.
Using 1” face spanner wrench (YTL2-0002) to set
the torque at setting 5. See Figure 49.
Figure 49