Warner Electric ARC 2000 - Manual (Page 14)

14 Warner Electric • 800-825-9050 P-2016 • ARC
• Component parts and rebuild kits on hand so
you do not incur downtime.
• Coming soon…secure website for headset
information and parts ordering with a credit card.
To schedule a certified Warner Service
Technician contact Melissa Bottke at
1-888-350-1891
Upgrade Kits
Warner Electric Capping Headsets
Benefits of upgrading your M4.5 Headsets:
1. Eliminate setscrew stripping during torque
adjustment
• Larger adjustment screws in housing makes
it easier to adjust the torque and helps prevent
stripping of the screw head. Old setscrew in a
10-32 utilizing a 3/32” wrench. The new
setscrew is a 1/4-28 utilizing a larger 1/8”
wrench.
2. Longer bearing and magnet life
• Bottom seal in end cap helps to prevent water
and other contaminants from getting inside of
the headset. Easy to retrofit in the field.
Here’s how to order:
1. Find the headset part number or serial number
engraved on the housing body.
2. Call 1-888-350-1891
3. See Cross-reference list below for part number
Information.
4. Parts are in stock and ready for immediate
delivery.
5. Step-by-step instructions available.
Material Requirements
Anti-Seize Compound
• Apply to spindle at time of headset installation
Cleaning Solution
• Alcohol based cleaning solvent used to wipe
and clean parts during rebuild.
Grease
• Citgo Clarion Food Grade Grease, HTEP NLGI
No. 2 Grade used to lubricate headset.
Loctite
• Blue Removable - 242 threadlocker used to
secure components within the headset.
Epoxy
• Five minute epoxy – Amber, Devcon dev-pak
adhesive 14270 used to fill counter-bores in
the magnet plate.
Information for Ordering
Spare Parts
It is important to stock spare parts on hand to avoid
unnecessary downtime. Warner recommends that
you stock at least two spare headsets per machine
and a few bearing and magnet rebuild kits so that
you have the necessary parts on hand if you need
them.
How to order spare parts – required information:
1. Purchase Order Number.
2. Warner headset model number/part number OR
serial number (only on models manufactured July
2007 and later).
3. Warner Component or Kit Part Number.
4. Preferred distributor to order from. All orders will be
routed through local distribution. Pricing and lead
time can be quoted by calling the Manufacturing
Facility at (888) 350-1891.