Warner Electric CBC-160-2N - Manual (Page 2)

2 Warner Electric • 800-825-9050 P-239-36 • 819-0450
Failure to follow these
instructions may result in product damage,
equipment damage, and serious or fatal
injury to personnel.
Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Connection Diagrams . . . . . . . . . . . . . . . . . . . . 4
Dimension . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Warranty . . . . . . . . . . . . . . . . . . . . . . Back Page
Introduction
The Warner Electric CBC-160 series clutch/
brake controls are single channel devices
designed to provide consistent and repeatable
release of Warner Electric’s Permanent Magnet
90 VDC Fail Safe Motor Brakes . The CBC-
160 series may also be used with any Warner
Electric 90 VDC clutch/brake .
The output to the clutch/brake is adjustable
through a potentiometer embedded in the
control . A red LED on the front of the CBC-
160 unit indicates when power is applied and
will vary in intensity with adjustment of the
potentiometer . The CBC-160-2N operates from
230VAC and can come from either a single
230VAC line or from a 230/460VAC motor . The
CBC-160-1N operates from a 120VAC source
and can come from either a single 120VAC line
or from a 120 VAC source in a 120V/240VAC
motor . CBC-160 control series mounts as the
cover to the standard module conduit box, part
number 5370-101-042 .
Specifications
Input:
CBC-160-1N: 120 VAC, 50/60Hz, 1 Phase
CBC-160-2N: 208-240 VAC, 60 Hz, 1 Phase
Output:
CBC-160-1N: Single Channel, 0-100 VDC
pulse width modulated full-
wave rectified voltage, 0 .8
amps maximum .
CBC-160-2N: Single Channel, 0-110 VDC
pulse width modulated full-
wave rectified voltage, 0 .8
amps maximum .
Ambient Temp:
-20° to 122°F ( -29° to 50° C )
Certifications:
UL, CUL, File E59164
Volume 3, Section 3
Switching:
CBC-160-1N: Supplied by customer on
AC input or accomplished
through motor starter .
CBC-160-2N: Supplied by customer on
AC input or accomplished
through motor starter .
Fusing: (external to control, supplied by
customer)
CBC-160-1N: 1 amp, 250V-fast acting
CBC-160-2N: 1 amp, 500V-fast acting
Cycle Rate:
Consult Warner Electric’s
Packaged Electromagnetic
Clutches/Brakes Catalog,
P-1234, for the energy
dissipation of your
application .
Limited by clutch/brake
Reorder Information
Model Part No.
CBC-160-1N 6013-448-001
CBC-160-2N 6013-448-002