Warner Electric PCBC-825, PCBC-1000, PCBC-1225 - Manual (Page 16)

16 Warner Electric • 800-234-3369 P-205-01
•
819-0474
Shaft Size .500 – 1.625
Static Torque 125 lb. ft.
Maximum Speed 4,000 rpm
Standard Voltage D.C. 6, 24, 90
All dimensions are nominal unless otherwise noted.
Customer Shall Maintain:
1. Concentricity of brake mounting pilot diameter
with mounting shaft within .010 T.I.R.
2. Squareness of brake magnet mounting face
with mounting shaft within .006 T.I.R. measured
at magnet mounting bolt circle.
.562 1.312 Max.
.562
5.656
5.750
.171
1.546
Max.
.921
5/16-18
UNC-3A
.562
1.312
2.562 Dia.
.093 When New .093
When New
2.718
1.500
1.593
9.437
Max.
8.625
Dia.
2.562
Dia.
5.468 Max.
* Mounting holes are within .010 of true position
relative to pilot diameter.
Magnet View
Removable plug in ends for
1/2" conduit.
6.812 Max.
9.749/9.747 Pilot Dia.
.358/.338 dia. (4)
holes equally spaced
on 8.875 dia.*
.358/.338 dia. (6) holes
equally spaced on
4.250 dia.*
3.503/3.502 Pilot
Dia.
3.750
See page 34 for details on
Bore & Keyway.
See page 6 for details for
drive pin mountings.
Armature View
3.5625
Dia.
PCB-825 Clutch-Brake Normal Duty Drawing I-25568