Warner Electric PCBC-825, PCBC-1000, PCBC-1225 - Manual (Page 18)

18 Warner Electric • 800-234-3369 P-205-01
•
819-0474
Shaft Size .500 – 2.500
Static Torque 240 lb. ft.
Maximum Speed 3,600 rpm
Standard Voltage D.C. 6, 24, 90
All dimensions are nominal unless otherwise noted.
Customer Shall Maintain:
1. Concentricity of brake mounting pilot diameter
with mounting shaft within .010 T.I.R.
2. Squareness of brake magnet mounting face
with mounting shaft within .006 T.I.R. measured
at magnet mounting bolt circle.
.562 1.453 Max.
.562
6.531
5.750
.171
1.546
Max.
.921
5/16-18
UNC-3A
.562
1.453
4.125 Dia.
.093 When New .093
When New
2.906
1.750
1.906
11.093
Max.
10.296
Dia.
5.252
Dia.
4.125
Dia.
6.031 Max.
Magnet View
(Inside & Outside Mounted)
Removable plug in ends
for 1/2" conduit.
7.687 Max.
11.500/11.498
Pilot Dia.
.358/.338 dia. (8) holes
equally spaced on
10.625 dia.*
.358/.338 dia. (6) holes
equally spaced on
6.125 dia.*
5.378/5.376
Pilot Dia.
3.750
Armature View
See page 34 for details
on Bore & Keyway.
See page 6 for details on
drive pin mountings.
* Mounting holes are within .010 of true position
relative to pilot diameter.
PCB-1000 Clutch-Brake Normal Duty Drawing I-25588