Warner Electric XCTRL-2DRV - Manual (Page 13)

Warner Electric • +33 (0) 2 41 21 24 24 P-2097-WE-A4 13
VII. XCTRL CONFIGURATION
1. XCTRL Configurator language Selection
Two languages are available: English and French. To select a language click on the main rolling menu and
select the desired language. By default French is selected.
2. Partition Setting
The set of parameters is called a partition. With recording and writing a partition you can easily check and
modify all parameters of the controller. With Saving or Opening a partition you are allowed to transfer all pa-
rameters from a computer or to a computer to backup or to email them for instance. The active partition can
also be selected by using the P1, P2, P3 inputs.
By default P1, P2, P3 are set to 0, giving then the partition 0 active when no wiring is made and thus inde-
pendently of the NPN or PNP input mode selection.