ATEN AS-811P - Manual (Page 16)

AS/2 Auto Switch
INSTALLATION
2-3 AS Buffer Card Installation
AS buffer card has 64K, 256K or 1M bytes of memory and is used to
expand the buffer memory of AS-41 1 P and AS-81 1 P auto switches.
1)
2)
3)
4)
5)
Unscrew the 4 screws on both sides of the case.
Lift up the upper case.
Find the 14 x 2 gold pin connector on the PCB
for AS-41 1 P users: see Fig 2-3-l.
for AS-81 1 P users: see Fig 2-3-2.
Push the plastic spacers through the PCB to secure the AS Buffer Card
Place the upper case back and tighten the 4 screws back.
Fig 2-3-l The AS-41 1 P’s Buffer Card Installation
User’s Manual
13