ATEN AS-811P - Manual (Page 2)

NOTICE
This manual is written for the Auto Switch products of AS-41 1 P/41 1 S and
AS-81 1P/811S. Most of the operations of these models are the some, and
differences will be specified. The last character ‘P’ and ‘S’ of each model’s string
means the parallel interface and the serial interface respectively.
In this manual, ‘AS/2’ is used to represent all the models of AS-41 1 P/
AS-41 1 S and AS-81 1 P/81 1 S. When you purchase this product it should contain
the following items.
PACKAGE CHECKLIST
l An AS/P(any one of AS-41 1 P/AS-41 1 S/AS-81 1 P/AS-81 1 S)
l The Power Adapter spec. depends on the following product model,
the power adapter supports AS-81 1 P model only.
Model Spec.
A S - 4 1 1 P NONE
l An AS/2 Auto Switch User’s Manual
QUICK LOOK INTERFACE TABLE
POWER ADAPTER BUFFER CARD
M O D E L INPUT PORT OUTPUT PORT SUPPORTED SUPPORTED
4 CENTRONICS Female CENTRONICS Female No/yes* Yes
8 CENTRONICS Female 1 CENTRONICS Female Yes Yes
1 RS-232C(DTE) Male NO N O
8 RS232C(DCE) Female 1 RS-232C(DTE) Male N O NO
*The adapter comes with buffer card.
AS/2 is a trademark of ATEN International Co., Ltd. IBM PC, PC/XT and
PC/AT are trademarks of International Business Machines Corporation.