ADIC FastStor Mass Storage Device - Manual (Page 40)

24 Operation and Maintenance
When your FastStor has completed the command, it will return to LdR REAdY.
L r rea y
1 2 3 4 5 6 7
Mode 2 – LOAD SLOT
Mode 2 causes the FastStor to load slot 6 from slot 1, or slot 7 from slot 2.
Note
If slots 6 and 7 already have cartridges, Mode 2 is not selectable on the LCD.
❐ Place a cartridge in slot 1 if loading slot 6, slot 2 if loading slot 7, or both if loading slots 6 and 7.
❐ To access Mode 2, press the MODE button until the LCD appears as shown:
loa slot
1 2 3 4 5
❐ Press the SELECT button to select Mode 2. The LCD will appear as shown (N is either slot 6 or 7):
SRC slot N
1 2 3 4 5
Note
If slots 6 and 7 already have cartridges, Mode 2 is not selectable on the LCD.
❐ Press the SELECT button to move the cartridge from slot 1 to slot 6, or from slot 2 to slot 7. After moving the cartridge
FastStor will return to LdR REAdY.