XLT XD-9006A (GAS Oven Version – C, AVI Hood Version – B) - Manual (Page 22)

22
Technical Support US: 888-443-2751 Technical Support INTL: 316-943-2751
OVEN SERVICE PROCEDURES
Multi-Valve Adjustment Procedure
Check Incoming Pressure:

Loosen screw 1 full turn counter clockwise (Figure 1)

Hook up Manometer to this test port

Turn main switch to the on position

Document incoming pressure on startup checklist. (If new installation)
Figure 1

Turn Main switch to the off position

Disconnect Manometer

Tighten screw clockwise until snug (Figure 2)
Figure 2