XLT XD-9006A (GAS Oven Version – C, AVI Hood Version – B) - Manual (Page 24)

24
Technical Support US: 888-443-2751 Technical Support INTL: 316-943-2751
W/C mbar kPa W/C mbar kPa
3.5 8.75 0.875 10 25 2.5
0.2 0.49 0.049 0.2 0.49 0.049
All Oven Models
Natural Gas LP Gas
Low Flame Bias
High Flame Bias
Figure 5
Check Low Bias Pressure:

Pull one of the two blue wires going into the modulating valve. (This simulates a temperature
drop and allows the oven to run at low flame bias)

(NOTE if the flame goes out turn the 5mm screw clockwise 1 turn to increase low flame bias)

Wait 30 seconds and the oven will re-light.

Using a 5mm socket turn the Low Flame Bias screw (Figure 6) until desired setting is
achieved. Use (Figure 5) for correct valve settings.
Figure 6
5 mm
OVEN SERVICE PROCEDURES
Multi-Valve Adjustment Procedure