XLT XD-9006A (GAS Oven Version – C, AVI Hood Version – B) - Manual (Page 23)

23
Technical Support US: 888-443-2751 Technical Support INTL: 316-943-2751
OVEN SERVICE PROCEDURES
Hook up Manometer:

Loosen screw 1 full turn counter-clockwise (Figure 3)

Hook up Manometer to this test port

Turn main switch to the on position
Multi-Valve Adjustment Procedure
Figure 3
Figure 4
Check High Bias Pressure:

Turn main switch to the on position

After 30 seconds of pre-purge the oven will light

Using a 8mm socket turn the High Flame Bias screw (Figure 4) until desired setting is
achieved. Use chart on next page (Figure 5) for correct valve settings.
8 mm