UltraGuard PRO 9549UG - Manual (Page 7)

Page 7
RED
87A
85 86
30
CUT
TO
IGNITION
SWITCH
TO
START
SOLENOID
87
TO +12 VDC
IGN./CRANK
EXISTING LOW CURRENT SOLENOID
FEED WIRE (+12VDC, CRANKING ONLY)
PRO
9549UG
CONTROL
MODULE
ORANGE
TRUNK RELEASE
Connect to +12 VDC Battery for
Positive Switched Trunk Release
or
Chassis Ground for Negative
Switched Trunk Release
DARK BLUE
BLACK
SIREN
GREEN w/WHITE
DOME LIGHT
EXISTING
DOOR PIN SWITCH
GREEN w/WHITE
BLACK
(-) TO VEHICLE'S
CHASSIS GROUND
WHITE
+12 VDC BATTERY
Connect to a +12 Volt
Battery Source.
(See Note on Voltage
Sensing)
EXISTING PARKING
LIGHT
BLUE
w/WHITE
GREEN YELLOW ORANGE
WHITE BLUE
EXISTING SWITCHED
OUTPUT
DARK BLUE
EXISTING TRUNK
RELEASE SWITCH
RED
RED
RED w/
WHITE
5A
FUSE
15A
FUSE
SHOCK SENSOR
Red, Black, and Green
Wires.
ENTRY ILLUMINATION
Connect to +12 VDC Battery for
Positive Switched Dome Light
or Chassis Ground for Negative
Switched Dome Light
GROUND SOURCE
Connect to Vehicle's Chassis
DOOR LOCK
OUTPUTS
WHITE w/BLACK
RED