ZOLL AutoPulse Rev D Users Guide - Manual (Page 35)

P/N 11440-001 Rev. 3 Page 2-11
User Guide
Figure 2-12 Administrative Menu
To access the Administrative Menu the AutoPulse must be powered off. The Administrative Menu is
activated by pressing the ON/OFF switch while both the Stop (orange) and Start (green) buttons are
being depressed. Once the Administrative Menu is active use the Move Up and Down arrow buttons to
highlight the desired menu item and the Select Choice Button to select it.
To exit from the Administrative Menu, press the “START” (green) button under the word “RESTART.”
The AutoPulse will restart and place you into the idle state, ready for patient alignment or for system
power-down.
Note: The current setting is displayed in the parenthesis after the main menu item.
A D M I N M E N U
S e t M o d e ( 3 0 : 2 o r C o n t ) S e t M o d e ( 3 0 : 2 o r C o n t )
S e t M u t e D u r a t i o n ( 3 0 s )
S e t To n e V o l u m e ( H i g h )
V i e w L a s t P a t i e n t I n f o
RESTART
3 0 : 2