ZOLL AutoPulse Rev D Users Guide - Manual (Page 60)

Page 3-22 P/N 11440-001 Rev. 3
User Guide
4. Aim the host computer’s infrared communication unit at the AutoPulse infrared communication
port.
Figure 3-20 Waiting for Connection... Display Panel Screen
5. Upon entering the Communication Mode the platform will immediately attempt to establish a
communication connection with the host computer. While this is occurring the “Waiting for
Connection...” panel screen is displayed. If a connection can not be established within ten minutes
the AutoPulse will automatically power down.
Figure 3-21 Connected Display Panel Screen
W a i t i n g f o r C o n n e c t i o n . . .
RESTART
C o n n e c t e d .
RESTART