ZOLL AutoPulse 100 - Manual (Page 16)

Page 1-4 P/N 12555-001 Rev 3
User Guide
Battery Charger: The AutoPulse Multi-Chemistry Battery Charger is a stand alone unit designed to
charge and automatically maintain both the AutoPulse Li-Ion Battery and the AutoPulse NiMH Battery.
The Multi-Chemistry Battery Charger has two charging bays, and each bay has its own indicators.
AutoPulse Batteries should always be properly maintained and be fully charged and ready for use before
deploying the AutoPulse.
For more information, refer to the AutoPulse Power System User Guide.
1.4 User Controls and Indicators
1.4.1 ON/OFF Button
The ON/OFF button is located adjacent to the Battery on the AutoPulse Platform (see Figure 1-3).
Pressing the ON/OFF button once powers up the AutoPulse Platform and initiates a self-test. The User
Control Panel’s green Power LED lights up. Pressing the ON/OFF button again powers down the
AutoPulse Platform.
Figure 1-3 ON/OFF Button Location
1.4.2 User Controls
All user controls and indicators (except the ON/OFF button) are contained in User Control Panel (see
Figure 1-4).
ON/OFF button
User Control Panel