ZOLL AutoPulse 100 - Manual (Page 27)

P/N 12555-001 Rev 3 Page 2-3
User Guide
8. Snap the LifeBand cover plate in place by fully inserting the locking tabs into the slots on the
AutoPulse (see Figure 2-3).
Figure 2-3 Snapping the LifeBand Cover Plate into Place
9. Flip down and snap into place the hinged belt guards of the LifeBand cover plate to engage the
LifeBand chest bands to the rollers (see Figure 2-4).
Figure 2-4 Flip Down the Hinged Belt Guards of the LifeBand
LifeBand Cover Plate
Alignment Arrows
Belt Guard