Agilent Technologies E6701A User Manual
Page 11
Copyright 2002 Agilent Technologies.
10001810-E6701A Tutorial LAN Connection
All Rights Reserved.
Page 11 of 32
Rev. 1.2; Feb. 14, 2002
1.
Choose the Internet Options icon
2.
Select the Connections tab
3.
Select the LAN Settings box
4.
In the “Automatic configuration” section, both “Automatically detect settings” and “Use
automatic configuration script” must NOT be checked.
5.
In the “Proxy server” section, “Use a proxy server” must be checked in most situations. If
your network does not use a firewall, or if you experience connection problems, uncheck this
box.
6.
If you checked “Use a proxy server”:
Enter your normal network proxy server (usually can be found by opening Internet
Explorer and selecting Tools…Internet Options…Connections…LAN Settings). You
may also need to try web-proxy and port: 8088.
7.
Select OK, then OK again to exit the Internet Options menu
8.
Choose the Network icon
9.
Select the Configuration tab
10.
In the scroll box labeled “The following network components are installed:” highlight your
Ethernet network device.
11.
Select the Properties box
12.
In the TCP/IP Properties box, select the IP Address tab
13.
Select “Specify an IP address”
14.
Enter the PC’s IP address as provided by your Network Administrator.
15.
In the Subnet Mask: field, we recommend you set the PC’s subnet mask to
255.255.255.0
16.
Select OK, then OK again to exit the Network menu