Agilent Technologies E6701A - Manual (Page 17)


Copyright 2002 Agilent Technologies. 10001810-E6701A Tutorial LAN Connection
All Rights Reserved. Page 17 of 32 Rev. 1.2; Feb. 14, 2002
3. Scroll to choose an unused http web address (or overwrite an old one).
4. Press the Menu (Edit) key
5. Under Enter URL: enter the following address:
http://local/waplite.wml
Editing addresses like this can be tedious on any menu-driven device, because you must
switch among the alphabetic, numeric, and multiple symbol menus to enter all of the
characters. Be patient. (Press the Menu key to switch among alpha, NUM, and SYM
key sets. While on a SYM set, press the OK (SYM) key to select among SYM1, SYM2,
SYM3, and SYM4 character sets).
6. Press the OK key
7. Exit the device’s browser.
Motorola Example: Press the lowest button on the left side of the phone to exit
the phone’s browser. The upper buttons are the volume controls. You will see the
phone’s turn-on display (usually shows “001-01”). The phone should still be
attached.
8. Turn the phone off.
Note: after you turn off the phone, you typically cannot turn it back on for about 10
seconds.
Setup is now complete.