Agilent Technologies E6701A - Manual (Page 7)


Copyright 2002 Agilent Technologies. 10001810-E6701A Tutorial LAN Connection
All Rights Reserved. Page 7 of 32 Rev. 1.2; Feb. 14, 2002
Setup
This section describes how to set up the hardware and software needed to use the test
application.
Note: This tutorial was written using a Motorola Timeport® phone. Examples are provided in
the instructions for setting up this phone. You may need to make different settings when using
your own wireless devices.
Hardware Connections
Figure 1. PC Connected to Test Set via a LAN
DUT
RF Test
Port
Device Under Test (with Test
SIM card installed)
RF IN/OUT
(Front Panel)
LAN PORT
(Rear Panel)
E5515B/C
Test Set with
E6701A LA
Personal Computer (with
Internet Explorer Web browser
and WAP Gateway software
installed)
LAN Cable
LAN
Port
RF Test Cable
LAN Ca
ble
LAN