Asus Motherboard PR-DLS533 - Manual (Page 107)

ASUS PR-DLS533 motherboard user guide 5-13
5.3 Microsoft ® Windows ® 2000 Server
5.3.1 LSI ® SCSI Driver Installation
Windows 2000 Server does not have drivers for the new SCSI controllers,
you must load the driver manually prior to Windows 2000 Server
installation.
A. Preparing an LSI Driver Disk
From the support CD, locate the LSI drivers in the following path:
\Drivers\SCSI\FUSION-MPT\Windows\1.08.22\Win2000
This procedure installs the SYMMPI.SYS driver onto a new or existing
Windows 2000 Server system. Depending upon the media used to
distribute LSI Logic drivers (web or CD-ROM), you will create a driver disk.
Copy the files listed in this section to the root directory of a clean diskette
as shown below. Label this diskette “Windows 2000 Driver Diskette.”
You will use this diskette during the installation process.
\txtsetup.oem
\symmpi.sys
\symmpi.tag
\oemsetup.inf
Locate the onboard LSI U320 SCSI executable driver in the following path:
\Drivers\SCSI\FUSION-MPT\Windows\1.08.22\Win2000.exe
B. New System Installation
This procedure installs the SYMMPI.SYS driver onto a Windows 2000
Server system. Use this procedure when installing Windows 2000 onto an
unused drive. Windows 2000 Server automatically adds the driver to the
registry and copies the driver to the appropriate directory. Choose one of
two methods to install these drivers onto a Windows 2000 Server system.
1. Boot directly from the Windows 2000 Server CD-ROM
-or-
2. Use Windows 2000 Server Boot Floppy Diskettes