Asus Motherboard PR-DLS533 - Manual (Page 97)

ASUS PR-DLS533 motherboard user guide 5-3
5.2 Microsoft ® Windows ® NT Server 4.0
5.2.1 LSI ® SCSI Driver Installation
Windows NT 4.0 does not have drivers for the new SCSI controllers, you
must load the driver manually prior to Windows NT 4.0 installation.
A. Preparing an LSI Driver Disk
From the support CD, locate the LSI drivers in the following path:
\Drivers\SCSI\FUSION-MPT\Windows\1.08.022\WINNT
This procedure installs the SYMMPI.SYS driver onto a new or existing
Windows NT system. Depending upon the media used to distribute LSI
Logic drivers (web or CD-ROM), you will create a driver disk.
Copy the files listed in this section to the root directory of a clean diskette
as shown below. Label this diskette “Windows NT Driver Diskette.”
You will use this diskette during the installation process.
\txtsetup.oem
\symmpi.sys
\symmpi.tag
\oemsetup.inf
Locate the onboard LSI U320 SCSI executable driver in the following path:
\Drivers\SCSI\FUSION-MPT\Windows\1.08.022\WINNT.exe
B. New System Installation
This procedure installs the SYMMPI.SYS driver onto a Windows NT 4.0
system. Use this procedure when installing Windows NT 4.0 onto an
unused drive. Windows NT 4.0 automatically adds the driver to the registry
and copies the driver to the appropriate directory. Choose one of two
methods to install these drivers onto a Windows NT 4.0 system.
1. Boot directly from the Windows NT 4.0 CD-ROM
-or-
2. Use Windows NT 4.0 Boot Floppy Diskettes.