Asus Motherboard PR-DLS533 User Manual
Page 140
5-46
Chapter 5: Driver installation
5.
Select the mpt package.
The mpt driver on this diskette is then loaded onto the system.
The system will again prompt you to load a driver even if loading was
successful.
6.
Type q (quit) and press Enter.
7.
Verify that the driver is now loaded successfully by typing:
pkginfo mpt
8.
The package information should read:
system mpt LSI Logic IHV HBA
After the mpt package is loaded, a message may appear that
indicates a system reboot is necessary.
9.
To reboot, type this command:
init 6
During the boot process, the operating system scans the system and
lists the devices found. If the kernel panics during boot, reboot the
system with the saved copy of the old kernel. Booting from the saved
copy of the kernel is described in the next section titled
Troubleshooting. If the reboot is successful, the system is ready to
use.