IEI Integration PCIE-G41A2 - Manual (Page 118)

PCIE-G41A2 PICMG 1.3 CPU card
Page 106
Figure B-1: Recovery Tool Setup Menu
Step 5: Press <5> then <Enter>.
Figure B-2: Command Mode
Step 6: The command prompt window appears. Type the following commands (marked
in red) to create two partitions. One is for the OS installation; the other is for
saving recovery files and images which will be an invisible partition.
(Press <Enter> after entering each line below)
system32> diskpart
DISKPART> list vol
DISKPART> sel disk 0
DISKPART> create part pri size= ___
DISKPART> assign letter=N
DISKPART> create part pri size= ___
DISKPART> assign letter=F
DISKPART> exit
system32> format N: /fs:ntfs /q /y