Figure b-11: select a local source drive – IEI Integration PCIE-G41A2 User Manual
Page 125
Advertising
PCIE-G41A2 PICMG 1.3 CPU card
Page 113
Figure B-11: Select a Local Source Drive
Step 6:
Select a source partition from basic drive as shown in Figure B-12. Then click
OK.
Figure B-12: Select a Source Partition from Basic Drive
Step 7:
Select 1.2: [Recovery] NTFS drive and enter a file name called
iei
(Figure B-13). Click Save. The factory default image will then be saved in the
selected recovery drive and named IEI.GHO.
WARNING:
The file name of the factory default image must be
iei.GHO
.
Advertising