IEI Integration PCIE-G41A2 - Manual (Page 82)

PCIE-G41A2 PICMG 1.3 CPU card
Page 70
Temp. Limit of OFF [000]
WARNING:
CPU failure can result if this value is set too high
The fan will turn off if the temperature falls below this value.
Minimum Value: 0°C
Maximum Value: 127°C
Temp. Limit of Start [020]
WARNING:
CPU failure can result if this value is set too high
When the fan is off, it will only start when the temperature exceeds this setting.
Minimum Value: 0°C
Maximum Value: 127°C
Start PWM [070]
This is the initial speed of the fan when it first starts spinning.
PWM Minimum Mode: 0
PWM Maximum Mode: 127
Slope PWM [0.5 PWM]
A bigger value will increase the fan speed in big amounts. A smaller value will increase the
speed more gradually.
0.125 PWM
0.25 PWM
0.5 PWM