IEI Integration ICE-DB-9S - Manual (Page 127)

ICE Module
Page 114
If unused, these signals can be left as NC.
Pin Signal PU/PD Series Notes V
D7 IDE_D[0..15] - -
Please refer to chapter 4
D13
D14
D15 IDE_A[0:2] - -
Please refer to chapter 4
D9 IDE_IOW# - -
Please refer to chapter 4
C14 IDE_IOR# - -
Please refer to chapter 4
D8 IDE_REQ -
- Please refer to chapter 4
D10 IDE_ACK# -
- Please refer to chapter 4
D16 IDE_CS1# -
- Please refer to chapter 4
D17 IDE_CS3# -
- Please refer to chapter 4
C13 IDE_IORDY PU
- Please refer to chapter 4
D18 IDE_RESET# -
- Please refer to chapter 4
D12 IDE_IRQ PU
- Please refer to chapter 4
D77 IDE_CBLID# -
- Please refer to chapter 4
If unused, these signals can be left as NC.
Pin Signal PU/PD Series Notes V
A13
A12 GBE0_MDI0+
GBE0_MDI0- PD RC - Directly connect to LAN transformer
A10
A9 GBE0_MDI1+
GBE0_MDI1-
PD RC
- Directly connect to LAN transformer
A7
A6 GBE0_MDI2+
GBE0_MDI2-
PD RC
- Directly connect to LAN transformer
A3
A2 GBE0_MDI3+
GBE0_MDI3-
PD RC
- Directly connect to LAN transformer
A14 GBE0_CTREF - -
Please refer to chapter 4
A8 GBE0_LINK# - -
Please refer to chapter 4
A4 GBE0_LINK100# - -
Please refer to chapter 4
A5 GBE0_LINK1000# - -
Please refer to chapter 4
B2 GBE0_ACT#
Please refer to chapter 4
If unused, these signals can be left as NC.
Pin Signal PU/PD Series Notes V
A50 LPC_SERIRQ - -
Please refer to chapter 4
B3 LPC_FRAME# - -
Please refer to chapter 4
B4
B5
B6
B7 LPC_AD0
LPC_AD1
LPC_AD2
LPC_AD3 - -
Please refer to chapter 4